Recently We Used KMbalancer II+ Multi-function Vibration Analyzer And Dynamic Balancer To Perform Dynamic Balancing Calibration For An Aluminum Alloy Company

A company specializing in the production of aluminum alloy products needs to ensure the normal operation and stability of the machine during the production process to ensure product quality and production efficiency. To this end, they chose KM as a partner to help them with dynamic balancing calibration services. In this dynamic balancing calibration service, KM's engineers used instruments to conduct a comprehensive inspection and analysis of the company's machine, and made necessary adjustments and corrections based on the results to ensure that the equipment operates in the best condition.

Imbalance will cause the entire combination to vibrate. The vibration caused by rotation will cause excessive wear of bearings, sleeves, shafts, reels, gears, etc., thereby reducing their service life. Once high vibration occurs, the structure will be damaged. The bracket and outer frame generate stress, which often leads to its entire failure, and the energy absorbed by the bracket structure will reduce the efficiency. On-site inspection showed that the amplitude of the fan before it was mechanically balanced was relatively large, and the vibration spectrum was mainly 1X rotation frequency amplitude with high power frequency, and rotation frequency and decibel frequency appeared. It was judged that the fan had impeller imbalance and possible bearing looseness. After the wind turbine balance correction, the vibration value dropped from 12.63/s to 0.54/s, and the amplitude dropped significantly. KM Company will continue to uphold the principle of high-quality service, continuously expand its technical fields, and provide customers with better technical solutions and service support.

If you want to know more about the dynamic balance instrument, please click:https://www.km-vibrationanalyzers.com/