Successfully Completed The Inspection Service Using KMbalancer II+ Vibration Analyzer And On-site Dynamic Balancer!

Although the use of vibration analyzers to detect the status of machine cannot be used as the only basis for determining the machine overhaul cycle, it is indeed necessary as a reference condition. Since the speed of equipment such as water pumps and fans is relatively low, vibration is not the only harm to them. For example, sometimes there is no problem with the vibration meter detection, but the impeller is severely corroded and needs to be overhauled. Therefore, the determination of the machine overhaul cycle should be comprehensively considered from the vibration meter detection results, the accumulated machine operation hours and efficiency and other aspects.

The fan operation mode is divided into two speeds (high speed in summer and low speed in winter). Since the installation, the fan has been vibrating normally when running at high speed, but vibrating violently when running at low speed. One of the fans could not operate due to vibration triggering alarm. A company in Jiangsu found us KM to provide vibration analysis services. We collected data at low and high speed conditions on site, measured and recorded the vibration signals of each conventional measuring point, and performed time domain analysis and spectrum analysis of the vibration signals on KMbalancer II+vibration analyzer and dynamic balancer. Based on the analyzed main vibration frequencies, we helped to identify the root cause of the machine vibration.

To learn more about vibration analyzer, please click here:https://www.km-vibrationanalyzers.com/