Improve Production Line Economics | KMbalancerII+ Vibration Analysis And On-Site Balancer Solves Winding Machine Rotor Unbalance Problems
Rotor imbalance is due to the rotor components quality eccentricity or rotor components defective failure, in industrial production, rotor imbalance problems once apparent, its impact is often far-reaching and complex. It will not only lead to increased vibration of the machine, the noise level rises significantly, but also may cause premature wear of bearings, seal failure and even the stability of the entire mechanical system to decline, and in serious cases, even cause machine shutdown, affecting the continuous operation of the production line, and bring inestimable economic losses to the enterprise.
KMbalancerII+ vibration analysis and on-site dynamic balancer have attracted numerous eyeballs in the market and won unanimous praise from customers, so the use of dynamic balancing instruments for the study and diagnosis of imbalance faults is also of the most practical significance. Ltd. workshop director feedback, the plant's winding machine dynamic balance problems, resulting in excessive vibration in the operation of the machine, in order to verify the effect of the dynamic balance of the 2 generation, KM engineers came to the scene to set the winding machine at 1500, 2000, 2400, 2800 different speeds to confirm the effect of the instrument demonstration is remarkable, the vibration can be reduced from the initial 3mm / s more than 0.3mm / s or so, so the factory of the dynamic balance of the initial 3mm / s or more to 0.3mm / s or so. The vibration can be reduced from the initial 3mm/s to about 0.3mm/s. Therefore, the manufacturer approved the machine.
The KMbalancerII+ vibration analysis and on-site dynamic balancer is not only capable of accurately identifying subtle differences in rotor imbalance, but also can quickly complete dynamic balancing corrections in complex and changeable on-site environments, which greatly improves the operational efficiency and stability of machines. Numerous enterprise users feedback that since the introduction of the machine, the machine failure rate has been significantly reduced, maintenance costs have been effectively controlled, and the continuous operation capability of the production line has been significantly enhanced.
Jiangsu Xinhongtai Electromechanical Co., Ltd. mainly do electromechanical equipment, wire and cable complete sets of equipment manufacturing, electromechanical equipment, electrical control systems, mechanical parts, lubrication and cooling devices, copper, copper wire, continuous annealing large pulling machine, continuous annealing machine for medium pulling, continuous annealing machine for small pulling, multi-head wire drawing machine production of a company.
To learn more about on-site dynamic balancing instruments, welcome to click:https://www.km-vibrationanalyzers.com/products
