KM Dynamic Balance Correction Service To Achieve Intelligent Equipment Operation And Maintenance Without Fear Of Challenges

With the rapid development of science and technology, rotating equipment is developing in the direction of large-scale and complicated, and once failure occurs, the loss is very serious. Rotating equipment realizes its function through rotating motion, and some minor faults occur during the rotation process, which may trigger a chain reaction, which in turn leads to a major failure of the entire equipment.

This time, KM engineers came to a customer's company in Zhuhai to carry out action balance correction. The customer is making metal flaw detection equipment, and there is a turntable rotating at high speed inside the equipment, so it is necessary to carry out action balance correction on the turntable. With KMbalancerII+multifunctional vibration analysis and on site dynamic balancing instrument, the speed is adjusted to 15000rpm at the customer's site, the vibration value is 1.56mm/s, after the test weight, and then the weight correction, the vibration is reduced to 0.7mm/s, and the fine balance can continue to reach 0.1mm/s, to achieve the customer's expected effect.

When the equipment is out of balance, professional technicians are needed to perform the balancing correction service. KM engineers have 30 years of professional experience to perform efficient vibration analysis service and dynamic balance correction service, including monitoring the vibration signal of rotating machinery, predicting the operating state of the equipment and diagnosing the fault, which has important practical significance and economic value.

If you want to know more about the dynamic balance instrument, please click:https://www.km-vibrationanalyzers.com/