KMbalancerII+ Vibration Analysis And On-site Dynamic Balancing Instrument Develop Bearing Failure Solutions For Yazi Technology’s Production Equipment
Bearings are commonly used parts in mechanical equipment, and their normal operation has a vital impact on the performance and life of the machine. If the bearings are faulty or worn, it will have a negative impact on the reliability and stability of the equipment, and may even lead to machine damage or accidents. The operating condition of the bearing will produce vibration. By detecting the vibration of the bearing, it can find whether the bearing is faulty or worn, and the specific cause of the fault.
The condition of the bearings of rotating equipment has always been the most concerning issue for equipment maintenance personnel. Yazi Technology is a small enterprise that processes machine tool spindles. The end customers of the products require that the vibration of the products be within the national standard. The engineer explained to the customer the basic knowledge of vibration and the relationship between frequency vibration and dynamic balance. We also performed single-sided dynamic balancing and double-sided dynamic balancing demonstrations on the machine tool in the factory. The amplitude dropped significantly and the customer was satisfied.
KMbalancer II+ uses a high-performance embedded microprocessor with a main frequency of 400MHz and has powerful data processing capabilities. KMVS Pro data collection and analysis software has a built-in bearing failure database that can be used to accurately analyze initial abnormal bearing problems and make early judgments on bearing wear or lubrication problems. For example: imbalance, misalignment, bent shaft, looseness inside and outside the machine, fluid turbulence, poor lubrication, abnormal motor and electrical appliances, abnormal bearings, abnormal gears, etc. can all be solved with KMbalancerII+.
If you are interested in our vibration analyzer, welcome to click: https://www.km-vibrationanalyzers.com/
