KMbalancerII+ Dynamic Balancing Instrument Completes Dynamic Balancing Correction Services For YOFC Wuhan Co., Ltd.
The construction technology of on-site balance correction has been widely used in modern industrial services. Commonly used machinery contains a large number of rotating parts, such as various transmission shafts, spindles, motors and turbine rotors, which are collectively called rotary bodies. Under ideal circumstances, the pressure on the bearing is the same when the rotary body is rotating and when it is not rotating. Such a rotary body is a balanced rotary body. However, various rotary bodies in engineering have asymmetrical geometric shapes due to uneven materials or blank defects, errors caused in processing and assembly, and even asymmetrical geometric shapes during design. When the rotary body rotates, the centrifugal inertial force generated by each tiny particle on it cannot cancel each other out. The centrifugal inertial force acts on the machine and its foundation through the bearing, causing vibration, generating noise, accelerating bearing wear, and shortening the mechanical life. , which can cause devastating accidents in severe cases. To this end, the rotor must be balanced to achieve the allowable balance accuracy level, or the resulting mechanical vibration amplitude must be reduced within the allowable range.
The optical fiber winding reel of YOFC Wuhan Co., Ltd. was worn for a long time after long-term operation. After modification, it became unbalanced, vibrated greatly, and the bearings were easily damaged. The winding machine in the production room needs to be dynamically balanced and calibrated to ensure the smooth operation of the winding machine. The old-fashioned balancing method has been used on site to try to balance the adjustment, which is time-consuming and labor-intensive. In many cases, the balance of the winding machine cannot be adjusted well. Later, the branch factory YOFC Optical Fiber Wuhan Co., Ltd. recommended KM Company's KMbalancerII+ vibration analyzer and on-site dynamic balancer. Then our company was invited to conduct on-site guidance. After testing and correction, the vibration became smaller and the on-site dynamic balance correction effect was good. YOFC Wuhan Co., Ltd. stated that it will continue to purchase in the future.
If you want to know more about dynamic balancer, welcome to click: https://www.km-vibrationanalyzers.com/
