The advantages of implementing on-site dynamic balance correction

1. It is not necessary to remove the rotating parts, reduce the downtime, and the on-site online balance correction generally only takes about one hour.

2 can be corrected at the actual working speed, usually after the removal of rotating parts, under the balance machine correction, can not be corrected at the high speed, and the on-site online dynamic balance correction can be corrected at up to 60000 RPM high speed.

3. There are many factors affecting the balance, including all the rotating components (impeller, shaft, coupling, key seat, etc.) of the balance and rotating parts installation clearance, deflection Angle and other factors, so the direct online balance to get better balance effect.

4. The problem of rotating equipment vibration is sometimes unrelated to balance. The use of on-site dynamic balance instrument can immediately detect whether there is a problem of poor balance and avoid unnecessary balance correction.

5. Double-sided dynamic balance correction is different from single-plane correction. When the ratio of rotating parts diameter to width is less than 2 times, it may be necessary to implement double-plane correction.

Application: fan impeller, pump impeller, rotating shaft, drum, motor rotor, processing machine spindle and other rotating parts.