Health Guardian For Machines | KMbalancerII+ Multifunctional Vibration Analyzer And On-site Balancer Solves CNC Machine Tool Balancing Problems!
With the development of industrial technology, the application of rotating machinery is more and more extensive, and its dynamic balance problem has been widely concerned. Portable dynamic balancer is different from dynamic balancing machine, it is a kind of instrument used to measure the dynamic balance of rotating machinery on the spot, the measured machinery is driven to rotate by itself, and the dynamic balancer can derive the unbalanced mass and angle by measuring the vibration and phase through signal processing and solving.
The spindle of a CNC machine tool of a manufacturer in Shandong Province was not processed with high precision at 4000-12000 RPM, which made the roughness of the machined parts bad. KM engineers carried KMbalancerII+ multifunctional vibration analyzer and on-site dynamic balancer to perform dynamic balancing correction service, and the final correction result reached the standard range of vibration, and the vibration value was reduced to 0.21mm/s. Not only that, after dynamic balancing test and calibration, we also found that there were equipment resonance points at 10000RPM and 15000RPM. Not only that, after the dynamic balance test and calibration of the spindle, it was also found that there were equipment resonance points at 10,000RPM and 15,000RPM, which made the on-site staff have a further understanding of the operation of the spindle while calibrating the spindle, and the on-site staff was very satisfied with the effect.
Portable dynamic balancer is different from dynamic balancing machine, it is a kind of instrument used for on-site measurement of dynamic balance of rotating machinery, the tested machinery is driven to rotate by itself, and the dynamic balancer derives the unbalanced mass and angle by measuring the vibration and phase through signal processing and solving. The dynamic balancer is equipped with functions such as rotational speed measurement, spectrum analysis, saving of influence coefficients, repeated measurement, switchable vibration units, report generation, etc. The rotational speed and vibration values will be displayed in real time during the dynamic balancer's testing process.
Measures such as improving the precision and reliability of the measuring equipment, selecting the correct calibration plane, improving the precision of the jigs and fixtures, and strengthening the skill training of the operators can effectively reduce the detection error and calibration deviation, and regular dynamic balancing inspection and adjustment is the key to ensure the stable operation of mechanical equipment!
To learn more about on-site dynamic balancing instrument, welcome to click:https://www.km-vibrationanalyzers.com/products
