KMbalancer Ⅱ Vibration Analysis And Field Dynamic Balance Instrument For Shenzhen Heng Yi 'an Technology Co., LTD. 3C High Precision Production Equipment Again Contribution. Customer Recognition, Our Harvest!

With the rise of 3C industry, high-precision production equipment is constantly upgraded while products are constantly optimized. Machine tools continue to develop to the direction of high speed, high precision and high efficiency, the spindle speed requirements are more and more high. But machine tool spindle assembly in the design, manufacturing and assembly process will inevitably produce by the structure, material and assembly caused by the center of gravity deviation from the center of rotation phenomenon, so that the machine vibration, noise bearing heating, the higher the speed of the imbalance caused by the vibration more intense.

Shenzhen Heng Yi An Technology Co., Ltd. is a high precision 3C digital processing center, due to the impact of manufacturing process, assembly quality, single piece quality and parts shape asymmetry, the spindle of multiple equipment in the factory will be rotated after the overall assembly of the center of gravity deviation, spindle center rotation phenomenon that is the so-called spindle rotation imbalance. Through peer introduction, I contacted KM Company to consult the dynamic balance correction instrument. According to the site conditions, our company introduced the vibration analysis of KMbalancer Ⅱ and the field dynamic balance instrument. Spindle rotation imbalance will cause vibration and noise and heat. The vibration of spindle and bearing can be effectively reduced through the balanced check of spindle movement, so as to reduce the temperature rise of spindle and improve the service life of spindle bearing.

Shenzhen Heng Yi 'an Technology Co., Ltd. was founded in May 2022, the factory is located in Longzhixiang Tiancheng Science and Technology Innovation Park, Yunfeng Road, Taocan Community, Dalang Street, Longhua New District, Shenzhen. It covers an area of 66,000 square meters, with a total construction area of 130,000 square meters. It is a 3C high precision digital processing center, with a total of more than 3,000 CNC equipment. There are more than 50 other kinds of testing equipment, including CMM (Hexgan) and other high-precision testing equipment.

Learn more about portable rotor balancer:https//:www.kmvibrationanalyzer.com/