KM VIB05 Multifunctional Vibration And Bearing Condition Detector Assists Beijing Fanak Electromechanical Co., Ltd. To Complete Bearing Detection

Bearing condition detection is an important part of the preventive maintenance of the vibrating screen. Early detection in addition to bearing damage to avoid equipment shutdown during unplanned maintenance caused by bearing damage, especially in important machines or harsh environments, vibrating screen bearings should be inspected often. The health of bearings is crucial to the health of equipment and processes (systems). With proper monitoring, impending failures can be identified and corrected. Conversely, if there is no adequate monitoring and no subsequent corrective action is taken when needed, a single bearing failure can result in complete equipment shutdown and countless hours of lost production.

Beijing Fanak Mechanical and Electrical Co., Ltd. has a batch of equipment need to carry out bearing testing. We know that our VIB05 multifunctional vibration and bearing state detector has three-in-one detection function, and the built-in rule of thumb automatically indicates the bearing alarm state, which can timely and effectively prevent the accidental shutdown of equipment due to failure. It also has the functions of vibration detection, bearing condition monitoring and infrared temperature measurement, and is equipped with imported vibration sensors. The company after understanding our products are very acceptable, then placed an order to put into use. We would like to express our heartfelt thanks to the leaders at all levels, new and old customers and friends from all walks of life who care and support our development.

Beijing Fanak Mechanical & Electrical Co., LTD was established on December 26, 1992, registered at No. 9, Shangdi Information Road, Haidian District, Beijing. The legal representative is Shanji Inaba. The business scope includes the production of FANUC CNC system, AC servo motor, AC servo unit, AC spindle motor, AC spindle unit, CNC turnkey system products; To provide complete engineering technical services; Provide after-sales service; Technical services; Software development; Sell self-produced products; Wholesale FANUC machine tool CNC system, AC servo motor (including servo unit), AC spindle motor (including spindle unit), FANUC laser generator.

Learn more about  vibration detector：https://www.kmvibrationanalyzer.com/